Cart

NPK Bio fertilizers for Trees.

 

 Features

• Replaces 50 to 75 percent of chemical nitrogen fertilizer (urea)

• Higher yield and quapty

• Excellent for organic farming

• Simple apppcation methods.

• Reducing fertipzer, transportation and warehousing costs

• Reduce the environmental hazards of chemical fertipzers

• Reduce soil-borne diseases

• Improve soil structure

• Using only 100-gram package per hectare (1 gram per tree)

 

 Special Suggestion

By mixing AzotoBARVAR-1 , PhosphoBARVAR-2 and PotaBARVAR-2 , NPK biofertilizer is in your hand to supplying nitrogen, phosphorus and potassium in healthy, safe manner fitted with the environment. Providing in separate packages helps quality assurance as well as farmers; decisions to use these bio-fertilizers individually, in pairs or all three together.

Compare
Sold By AgriShop
Category:

 Introduction

Nitrogen is the most needed nutrient for plant growth and development. It is a mobile element in nature with a high dynamism among atmosphere, soil and organisms. In plants, it is a basic ingredient of amino acids, proteins, nucleic acids, chlorophyll, vitamins and so on. When it is low, the growth of vegetative organs is ceased, photosynthesis is reduced and leaves turn yellowish. When available sufficiently, leaves are green, growth of stem and leaves increases and, as a result, the level of photosynthesis is high. Although three quarter of air atmosphere is nitrogen, it needs to be fixed in the forms of ammonia (NH4+) or nitrate (NO3-) to be absorbed by plants. This is mostly done by beneficial bacteria in soil.

 AzotoBARVAR-1 (Nitrogen Biofertilizer)

The so-called AzotoBARVAR-1 Nitrogen Biofertilizer contains live Azotobacter vinelandii strain O4 at 107 to 108 CFU per gram or ml and formulated to have a shelving life for at least six months. A. vinelandii is an obligate aerobic free-living gram negative soil bacterium capable of fixing nitrogen using three distinct nitrogenize systems active under fully aerobic conditions that typically inactivate the nitrogenize enzyme. However, oxygen transfer rate into the cell is reduced by the increase of alginate concentrations during the course of A. vinelandii growth. This phenomenon provides a low intracellular oxygen concentration needed for nitrogenize activity.

The researchers screened soil samples taken from the rhizosphere of agricultural crops for isolation of 26 A. vinelandii strains for which several physiological and biochemical characteristics were determined. Molecular identification was performed using selective nifH-g1 primers. The selected isolate, O4 strain, was able to fix atmospheric N2 on nitrogen-free medium at the rate of 326.4 moll C2H4 h−1 vial−1. This bacterial strain is active at high salt (up to 7%), wide range of pH (4 to 11) and high temperature (up to 45°C).

AzotoBARVAR-1 Nitrogen Biofertilizer is produced solely by Green Biotech Incorporation that take advantage of the latest mass production methods and equipment supervised by outstanding scientists to ensure good manufacturing practice carrying international certificates such as Quality Management System (ISO 9001), Environmental Management System (ISO 14001) and Corporate Social Responsibility (ISO 26000). The product, AzotoBARVAR-1 Nitrogen Biofertilizer, is also supported by several official documents including CE Mark, no heavy metal record and phytosanitary certificate. All the production steps including the packaging are performed in aseptic conditions. One of the important features of this product is the use of live bacteria on wet powder or liquid carriers. For quality assurance, all the steps and products are carefully controlled by experienced personnel at quality assurance unit. Such that, the finished products are packaged and released to the market after passing several quality control steps. After sale services and supports as well as post-sale monitoring ensure proper utilization of products and farmer satisfaction.

 AzotoBARVAR-1 for Trees

 

 Instructions

 Recommendations

For the best results, apply AzotoBARVAR-1 as instructed below:

1. Reduce the consumption of chemical Nitrogen fertilizer for at least 50 percent.

2. Use all other fertilizers (e.g., P, K), pesticides, etc. as usual.

3. Keep the package out of direct sunshine and extreme temperatures, freezing or hot weather.

4. AzotoBARVAR-1 Biofertilizer is packaged in aseptic conditions. Therefore, try to use all the contents in the same day.

5. Our experiences during the past 12 years have shown that seed coating method causing higher yield increases In comparison to irrigation method because AzotoBARVAR-1 Biofertilizer must reach plant roots. In Irrigation Method, however; the outcome increases if an additional irrigation regime applied to the field after the first irrigation. Preferentially this step should be repeated in 40-50 days.

6. When making solution, please filter it through a piece of fine cloth before adding to a sprayer. The remaining particles on the filter are not the active material as the bacteria are suspended in the liquid and are invisible.

7. Avoid mixing AzotoBARVAR-1 with other chemicals (fertilizers, pesticides …). Application of them one after the other separately is fine.

 Instructions

To make the stock solution, add the content of an AzotoBARVAR-1 package to 2-5 Liter water. Filter the solution by passing through a fine cloth.

Planting trees

1. Add AzotoBARVAR-1 stock solution to 20 to 50 liters of water to make a stock solution.

2. Deep roots in the solution right before planting. Alternatively, add it onto the exposed roots before covering with soil.

 A
 B

Fertilizing trees – The first method

1. Dilute AzotoBARVAR-1 stock solution in 100 liters of water.

2. Dig 2 to 4 holes around trees canopies to reach the young roots. You may do it by a tool as shown.

3. Pour a total of 1 liter of AzotoBARVAR-1 solution into the holes for each tree.

 A
 B

Fertilizing trees – The second method

1. Dilute AzotoBARVAR-1 stock solution in 100 liters of water.

2. Spray onto the dug holes before adding other organic or chemical fertilizers.

During irrigation

1. Dilute AzotoBARVAR-1 stock solution in 50-200 liters of water.

2. Begin irrigation of the garden.

3. In the middle of irrigation, begin adding the AzotoBARVAR-1 solution.

4. Option: This practice may be repeated 40 to 60 days later for a better outcome.

Application time

Step 1: at the time of the first leaf buds emergence (after verbalization).

Step 2: at the time of falling flowers and forming fruits before ripening.

PhosphoBARVAR-2 (Phosphate Biofertilizer)

100 grams for one hectare or 100 trees

Natural

PhosphoBARVAR-2 Biofertilizer contains two types of naturally occurring phosphate-solubilizing bacteria that release phosphate ion from its in/organic compounds by producing organic acids and robust phosphatase enzymes around the roots.

Depending on the available phosphate level in the soil, 50-100% of chemical phosphate fertilizer must be replaced with a 100-gram PhosphoBARVAR-2 bag.

Ingredients:  bagasse, perlite, water, 107 to 108 CFU/g of Pantoea agglomerans P5 and Pseudomonas putida P13 bacterial culture.

 Features

● Excellent for organic farming

● The best alternative for chemical phosphate fertilizers

● Higher yield and quality

● Restoration of soil microbial profiles

● Reducing fertilizer, transportation and warehousing costs

● Easy to use

 Recommendations

For the best result, apply PhosphoBARVAR-2 as instructed below:

1. Reduce the amount of chemical phosphate fertilizer to 50% or less.

2. Use all other fertilizers (e.g. N, K), pesticides, etc. as usual.

3. Do not mix PhosphoBARVAR-2 with concentrated fertilizers and pesticides in the same container. Diluted solutions may be used together.

4. PhosphoBARVAR-2 biofertilizer must reach plant roots. Therefore, seed treatments is strongly recommended.

5. When making solution, please filter it through a piece of fine cloth before adding to a sprayer. The remaining particles on the filter are not the active material as the bacteria are suspended in the liquid and are invisible.

6. Use the required micronutrients as usual.

7. PhosphoBARVAR-2 is packaged in aseptic conditions. Therefore, try to use all the contents in the same day.

8. Keep PhosphoBARVAR-2 out of extreme temperatures and direct sunlight.

9. Do not use after the expiry date.

 Instructions

One bag is enough for one hectare or 100 trees. Prepare a solution of PhosphoBARVAR-2 in 1 to 2 liters of water per bag. Filter through a piece of fine cloth (provided), if needed. In case of prolonged work, stir the solution every 15 minutes.

For seed or tubers treatments:

Add PhosphoBARVAR-2 solution to a clean sprayer. Spray the seeds while mixing thoroughly before sowing. PhosphoBARVAR-2 solution can also be applied with common seed treatment machines.

For plantation of trees:

Dilute PhosphoBARVAR-2 solution in 100 liters of water, immerse plant roots in this solution or pour one litter on the exposed roots right before adding soil.

1
2

For at-base application:

Using a shovel, a T-shape or mechanical groove making tools, dig two to four holes with 20-40 cm depth in the shading circle of tree canopy. Dilute PhosphoBARVAR-2 solution with 100 liter of water. Distribute one liter into the holes for each tree.

1
2

For irrigation (top dressing):

1. Waterlogging or deep-watering irrigation methods: place a tank of the above biofertilizer solution diluted in 100 liters of water at the track of irrigation. When the water run at the middle of the garden, turn on the tab, so that the solution is distributed evenly.

2. Pressure irrigation methods (dripping irrigation): pour the above filtered solution into pressured water reservoir tank. It must be proportional to the number of trees watered during a day. For example, to irrigate 1000 trees a solution made by pouring 10 packs of each biofertilizer must be added to the solution in the reservoir tank.

 Application time

In trees:

Step 1: at the time of the first leaf buds emergence (after verbalization).

Step 2: at the time of falling flowers and forming fruits before ripening.

PotaBARVAR-2 (Potassium Biofertilizer)

PotaBARVAR-2 biofertilizer contains two types of potassium solubilizing bacteria. The bacteria hydrolyze insoluble compounds of potassium in the soil around the roots releasing the ion for optimized absorption.

PotaBARVAR-2 Potassium Biofertilizer is produced solely by Green Biotech Incorporation that take advantage of the latest mass production methods and equipment supervised by outstanding scientists to ensure good manufacturing practice carrying international certificates such as Quality Management System (ISO 9001), Environmental Management System (ISO 14001) and Corporate Social Responsibility (ISO 26000). The product, PotaBARVAR-2 Potassium Biofertilizer, is also supported by several official documents including CE Mark, no heavy metal record and phytosanitary certificate. All the production steps including the packaging are performed in aseptic conditions. One of the important features of this product is the use of live bacteria on wet powder. For quality assurance, all the steps and products are carefully controlled by experienced personnel at quality assurance unit. Such that, the finished products are packaged and released to the market after passing several quality control steps. After sale services and supports as well as post-sale monitoring ensure proper utilization of products and farmer satisfaction.

 Instructions

 General instructions

For the best results, apply PotaBARVAR-2 as instructed below:

1. Reduce the consumption of chemical Potassium fertilizer for at least 50 percent.

2. Use all other fertilizers (e.g., N, P), pesticides, etc. as usual.

3. Keep the package out of direct sunshine and extreme temperatures, freezing or hot weather.

4. PotaBARVAR-2 Biofertilizer is packaged in aseptic conditions. Therefore, try to use all the contents in the same day.

5. Our experiences during the past 12 years have shown that seed coating method causing higher yield increases In comparison to irrigation method because PotaBARVAR-2 Biofertilizer must reach plant roots. In Irrigation Method, however; the outcome increases if an additional irrigation regime applied to the field after the first irrigation. Preferentially this step should be repeated in 40-50 days.

6. When making solution, please filter it through a piece of fine cloth before adding to a sprayer. The remaining particles on the filter are not the active material as the bacteria are suspended in the liquid and are invisible.

7. Avoid mixing PotaBARVAR-2 with other chemicals (fertiulizers, pesticides …). Application of them one after the other separately is fine.

 Instructions for Trees

To make the stock solution, add the content of a PotaBARVAR-2 package to 2-5 Liter water. Filter the solution by passing through a fine cloth.

Planting trees

1. Add PotaBARVAR-2 stock solution to 20 to 50 liters of water to make a stock solution.

2. Deep roots in the solution right before planting. Alternatively, add it onto the exposed roots before covering with soil.

 A
 B

Fertilizing trees – The first method

1. Dilute PotaBARVAR-2 stock solution in 100 liters of water.

2. Dig 2 to 4 holes around trees canopies to reach the young roots. You may do it by a tool as shown.

3. Pour a total of 1 liter of PotaBARVAR-2 solution into the holes for each tree.

 A
 B

Fertilizing trees – The second method

1. Dilute PotaBARVAR-2 stock solution in 100 liters of water.

2. Spray onto the dug holes before adding other organic or chemical fertilizers.

During irrigation

1. Dilute PotaBARVAR-2 stock solution in 50-200 liters of water.

2. Begin irrigation of the garden.

3. In the middle of irrigation, begin adding the PotaBARVAR-2 solution.

4. Option: This practice may be repeated 40 to 60 days later for a better outcome.

Application time

In trees:

Step 1: at the time of the first leaf buds emergence (after verbalization).

Step 2: at the time of falling flowers and forming fruits before ripening.

Reviews

There are no reviews yet.

Be the first to review “NPK Bio fertilizers for Trees.”

Your email address will not be published. Required fields are marked *

Loading...